Metal Cutting Fluids
METAL CUTTING FLUIDS
IS : 1115 and ZX of Indian defense
Application areas:Suitable for all metals for machining operations where emulsifiable oil are normally used. The recommended concentration is between 5 to 10 % depending on the severity of machining. Sometimes used successfully for even grinding operations.
This is general-purpose emulsifiable oil and forms milky white emulsion.
- Good surface finish
- Built in protection against bacterial growth Excellent emulsion stability
- Good heat removal properties
|Colour After Emulsification||Milky White|
|Kinematic Viscosity @ 40 °C, Min, cSt||20|
|Flash Point, COC °C, Min||150|
|Copper Corrosion @100 °C, Min||1|
|Cast Iron Corrosion Test, 20:1 Emulsion with 400 PPM Hard Water Max||0/1-1|
|Emulsion Test: 400 PPM Hard Water 5:1 and 20:1 Ratio||PASS|