Metal Working Fluids
KOOLKUT 40 MS
METAL CUTTING FLUIDS
Meets specifications:
IS : 1115 and ZX 1 of Indian defense
Application areas:
KOOLKUT 40 MS is suitable for machining operations for all metals except magnesium where emulsifiable oils are normally used. The recommended concentration is between 5 to 20 % depending on the severity of machining. Used successfully for some grinding opDetail Description
KOOLKUT 40 MS is a water miscible mineral oil based metal cutting fluid which forms a milky white tight emulsion.
Performance benefits:
- Excellent Corrosion protection
- Good surface finish
- Excellent emulsion stability
- Excellent protection against Bacterial Growth
- Good heat removal properties
Physico-chemical properties
| PROPERTIES | TYPICAL VALUES |
|---|---|
| KOOLKUT 40 MS | |
| Colour After Emulsification | Milky White |
| Kinematic Viscosity @ 40°C, cSt, Min | 20 |
| Flash Point, COC °C, Min | 150 |
| Copper Corrosion @100 °C, Min | 1 |
| Cast Iron corrosion Test as per IS 1115 | 0/1-1 |
| Emulsion Test: 400 PPM Hard Water 5:1 and 20:1 Ratio |
PASS |
| Thermal Stability as per IS 1115 | PASS |