Metal Cutting Fluids
HP KOOLKUT 60
SOLUBLE CUTTING FLUIDS
Suitable for all metals for machining operations where emulsifiable oils are normally used. The recommended concentration is between 5 to 10 % depending on the severity of machining. Particularly useful for all applications where sight of the work place is important.
General purpose emulsifiable cutting oil forming a translucent emulsion. The ultra-fine dispersion of the oil globules reduces grinding wheel clogging and low oil content emulsion may be used safely without loss of non-corrosive properties.
|Colour After Emulsification||Transluscent|
|Pour Point of Oil °C, Max||18|
|Flash Point, COC °C, Min||150|
|Copper Corrosion @100°C, Min||1|
|Cast Iron Corrosion Test, With 5:1 and 20:1 Emulsion Max||0/1-1|
|Emulsion Test: A-EP Method and Ratios B-5:1
and 20:1 as per ISSM 1115:1986